Call Alpharetta
This Audi RS5 came to Solo Motorsports for a Stage 2 JB4 SMS-Tuned performance project. The owner paired its 2.9-liter twin-turbo V6 with intake, exhaust, and chassis upgrades. The completed setup recorded 442 wheel horsepower and 511 wheel torque on our dyno.
The original engine specification lists 444 horsepower and 443 lb-ft of torque. Those are engine ratings, while the workshop results below are wheel measurements. They are different measurements and should not be compared as a direct gain.
Audi RS5 Build Preparation
Before the tuning runs, the owner selected an Eventuri intake, AWE exhaust hardware, and a 034Motorsport strut brace. These parts formed the documented build package.
Our dyno-testing service provides a controlled place to review a completed setup. The goal is to assess the car as a whole, rather than judge one part from its description alone.
Audi RS5 Eventuri Intake
The Eventuri intake replaces the original airboxes and duct feeds with a sealed intake system. Together, its filter housing and ducts provide a smoother path for incoming air.
Keeping the intake enclosed also addresses where the engine draws its air from. This is the intake recorded for this project; the article does not isolate a horsepower gain from the intake by itself. The final dyno result reflects the complete combination.
Exhaust Hardware
The build also includes AWE exhaust hardware described in the original project as a resonated performance downpipe. The resonator is part of the sound-control design.
Our team matches exhaust parts and calibration to the exact vehicle and intended use. This project does not establish a universal guarantee about warning lights, sound levels, or results on another Audi.
Chassis Support
The owner also chose a 034Motorsport strut brace. The brace links the strut-tower area as part of the chassis package.
Anyone considering a similar part should verify its exact part number and vehicle application. A description for another Audi model is not enough to confirm RS5 fitment. Our team can review the specific hardware before installation.
Audi RS5 Dyno Results
The completed SMSTuned Audi setup recorded 442 WHP and 511 WTQ. These are the results for this car with its installed parts and calibration.
This feature does not include a stock wheel-power baseline. We therefore do not claim a measured gain over stock from these figures alone. Fuel, conditions, vehicle health, and test procedure can affect results on another car.
To discuss an Audi RS5 project, contact Solo Motorsports with your current modifications and goals. We can help review the complete setup and plan the next step.